EtherWAN 867Mbps Plug & Play Wireless Bridge Kit

Easy

• Mount units to a pole or wall using included mount kit
• Signal strength LED’s for easy alignment
• Just power and align using supplied PoE injectors and power supplies
• No technical expertise needed

Highly Secure

• Encrypted & Authenticated Wireless Connection (WPA2)
• Every kit has unique SSID and security settings

Hardened-Grade for Outdoor & Harsh Environments

• Fanless and ruggedized outdoor IP67 enclosure (Rainproof)
• Wide operating temperature range (-40 to 167°F)
• Connections up to 2 miles away

What’s Included

• 2 x units preconfigured to connect with optimal performance up to 300Mbps
• Includes all Mounting Hardware
• Includes 2 x power supplies and 2 x PoE injectors

Overview

EtherWAN’s EasyLink is a pre-configured point to point (PtP) Bridge kit which allows for connecting remote locations wirelessly up to 2 miles away. EasyLink’s simple setup allows you to connect locations by mounting the hardware, powering them on and aligning the units using the built-in alignment LEDs. Each kit contains two paired units that connect automatically using a highly secure, unique, hidden SSID and randomly-generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected.

 

Wireless

• Frequency 5 GHz
• Max data rate 867 Mbit/s
• Number of chains: 2
• Standards 802.11a/n
• WPA2 Passphrase
• 256-bit AES-CCM Encryption
• Dynamic Frequency selection

 

Layer 2 Features

• Auto-negotiation for port speed and duplex
• Redundant Protocols (always enabled)
  • IEEE 802.1D STP
  • IEEE 802.1w RSTP
  • IEEE 802.1s MSTP

Interface

• Ethernet
  • 10/100/1000BASE-T Passive PoE
• Wireless
  • 11a/n
• LED Indicators


Technology

• Standards
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-T
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3x full duplex and flow control
  • IEEE 802.1D STP
  • IEEE 802.1s MSTP
  • IEEE 802.1w RSTP
  • IEEE 802.11w Management Frame Protection (MFP)

 

• Power
  • PoE in (Passive PoE)
  • PoE in input Voltage 6-30V
  • Max power consumption 10W

 

Physical

• Casing Material
  • UV Protected Polystyrene case
• Dimensions
  • 185 x 185 x 63.5mm (W x D x H)
7.28″ x 7.28″ x 2.5″
• Weight (shipping)
  • 3lbs (2.4kg)
• Installation Type
  • Pole/Wall

 

Environmental

• Operating Temp.
  • -40 to 75°C (-40 to 167°F)
• Storage Temp.
  • -45 to 85°C (-49 to 185°F)
• Relative Humidity
  • 5% to 95% (non-condensing)
• Wind Survivability
  • 200km/h
*Power supply rated 5 to 158°F

 

Regulatory

• ISO
  • Manufactured in ISO-9001 facility
• EMI
  • FCC Part 15B Class A
  • PCC Part 15C

 

Environmental Test Compliance

• IEC 60068-2-6 Fc (Vibration Resistance)
• EN 61000-4-3 (Radiated RFI)

 

Warranty

• Length
  • 3 Years

 

What’s in the Box

– 2 x Paired Easylink Units, 2 x Wall Power Supplies, 2 x

PoE Injectors, 2x Passive to Active PoE Converters, 2 x Pole Mounting kit, 2 x Wall Mounting Poles, Quick Install Guide (see picture at top)